ORANGEBOX Posted December 24, 2012 Share Posted December 24, 2012 Hi, I bought 2 x 4 GB Corsair CM3X4GSD1066 RAM modules for my Sony Vaio VPCS13A7E (C104YV2F) laptop in order to pass from 4 GB (2 x 2GB) to 8 GB. When I boot the laptop with CM3X4GSD1066 ram modules I get Windows 7 BSOD, similar behaviour with Linux (completely black window). I tried to run Memory Tool like memtest but it fails after few seconds. With old memory it works perfectly. I have the last BIOS (INSYDE R2100Q3 09/21/2010). Ideas? Northbridge Intel Havendale/Clarkdale Host Bridge rev. 02 Southbridge Intel HM55 rev. 05 Memory Type DDR3 Memory Size 4096 MBytes Channels Dual, (Symmetric) Memory Frequency 532.0 MHz (4:16) CAS# latency (CL) 7.0 RAS# to CAS# delay (tRCD) 7 RAS# Precharge (tRP) 7 Cycle Time (tRAS) 20 Row Refresh Cycle Time (tRFC) 60 Command Rate (CR) 1T MCHBAR I/O Base address 0x0FED10000 MCHBAR I/O Size 4096 Old RAM: DIMM # 1 SMBus address 0x50 Memory type DDR3 Module format SO-DIMM Manufacturer (ID) Hyundai Electronics (AD00000000000000) Size 2048 MBytes Max bandwidth PC3-8500F (533 MHz) Part number HMT125S6TFR8C-G7 Serial number 554375F4 Manufacturing date Week 39/Year 10 Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP no AMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 5.0-5-5-15-20 @ 380 MHz JEDEC #2 6.0-6-6-18-24 @ 457 MHz JEDEC #3 7.0-7-7-20-27 @ 533 MHz JEDEC #4 8.0-8-8-23-31 @ 609 MHz DIMM # 2 SMBus address 0x52 Memory type DDR3 Module format SO-DIMM Manufacturer (ID) Hyundai Electronics (AD00000000000000) Size 2048 MBytes Max bandwidth PC3-8500F (533 MHz) Part number HMT125S6TFR8C-G7 Serial number 552375F6 Manufacturing date Week 39/Year 10 Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP no AMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 5.0-5-5-15-20 @ 380 MHz JEDEC #2 6.0-6-6-18-24 @ 457 MHz JEDEC #3 7.0-7-7-20-27 @ 533 MHz JEDEC #4 8.0-8-8-23-31 @ 609 MHz Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 28, 2012 Corsair Employee Share Posted December 28, 2012 What is the lot code on the modules? It will be a 8 or 9 digit number that will start with an 11 or 12! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.