sixstorm1 Posted December 14, 2012 Share Posted December 14, 2012 Hi, I needed to use my Padlock 2 on multiple machines so I followed the instructions in the manual "Keeping your Flash Padlock Unlocked" to keep the USB drive unlocked. Now, how do you re-lock the drive once the drive has been unlocked permanently? Is there a way to do this or we must reset the drive and erase all data? If so this is a terribly bad drive design. The manual is not clear about this. Thank you! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 18, 2012 Corsair Employees Share Posted December 18, 2012 The manual reset should just put the drive back in its Virgin state like when you first opened the drive. So just follow the directions in the manual to set a new pass word and you should be set. Link to comment Share on other sites More sharing options...
sixstorm1 Posted December 18, 2012 Author Share Posted December 18, 2012 The manual reset should just put the drive back in its Virgin state like when you first opened the drive. So just follow the directions int eh manual to set a new pass word and you should be set. Ok that worked. Just re-lock the drive using "Setting a PIN for the first time". Thank you! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.