Dawkness Posted December 5, 2012 Share Posted December 5, 2012 Hello, I recently bought a 200R which is a great case for the price. I also have a H60 Water cooler. Would it be a good idea to have the cooler pulling air in from the bottom of the case or pulling air in from the top or back? I currently have it pulling air in from the back. Current Config, 2x120MM Intake Front 2x120MM Exaust Top 1x120MM Intake Side Panel 1x120MM Intake Bottom H60 Rear Intake Thank you for taking the time to read this. Thank you for Helping. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 6, 2012 Corsair Employees Share Posted December 6, 2012 You will get the best cooling with cool out side air going over the Radiator and normally this would be best by installed the Radiator above the I/O in the back and set it to push air inside the case through the radiator Link to comment Share on other sites More sharing options...
Hood Posted December 8, 2012 Share Posted December 8, 2012 I had one in the bottom for a while, but it picks up a lot more dust there, so I moved it to the back. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.