Jump to content
Corsair Community

xms3202v2.2 & xms3202v3.1


DoggE

Recommended Posts

I have had a stick of CMX512- 3200C2 xms3202v2.2 in my machine for a while now. I recently purchased the same type but of xms3202v3.1, and now the machine will not post with both sticks in it. THey are running on a asus P4C800. Is there any chance I can change my memory timing settings to get them working together. I would rather not purchase another stick. Currently it use DRAM SPD for the settings rather than manual settings. I also live in Australia.

 

Thanks

Link to comment
Share on other sites

  • Corsair Employee
With 2 single modules on most MB's the modules may need to be exactly matched both in part# and revision. Sorry, but that does seem to be the case with this MB as well! And the suggested settings for 2 single XMS3200C2 modules would be Cass 2.5-3-3-7 and I would set the Dim Voltage to 2.75 Volts as well you might try setting the timings manually and see if the system will post!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...