Jump to content
Corsair Community

xms3200c2 rev 3.1/3.2 with infinity/LP-b


stevo_125

Recommended Posts

anyone here know if the rev 3.1 and 3.2 512mb modules of XMS work ok with the dfi infinity / LP-B. I've tried twinmos ram, and kingston value, and neither have worked over 170fsb. The reason being infinitiy's are fussy about double sided ram (my board works fine with 256 sticks). the latest bios caused problems for my board, so i am stuck with the factory bios so the ram needs to be able to run at 200+ fsb with cpc on (command rate @ 1t) anyone here that can help me ??? :confused:

perhaps the great "ram guy" knows the answer to this one. :D:

Link to comment
Share on other sites

  • Corsair Employee
Yes they both should be Infineon IC's! But I would suggest you set the timings to Cass 2.5-3-3-7 and set the Dim Voltage to 2.8 Volts and you can test with the CPC setting but it would not be guaranteed at a setting of 1 with 2 single modules!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...