ionstorm66 Posted August 17, 2012 Share Posted August 17, 2012 Are the temperature sensors standard 10K ohm, or are they something else? Link to comment Share on other sites More sharing options...
wytnyt Posted August 19, 2012 Share Posted August 19, 2012 Are the temperature sensors standard 10K ohm, or are they something else? this is a questions id like to have answered myself perhaps someone will have an answer to this Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 20, 2012 Corsair Employees Share Posted August 20, 2012 I am sorry I don't have an answer for this at this time and Cool Guy is out of the country so it may be a few days before I can get an answer for you. Link to comment Share on other sites More sharing options...
seross69 Posted October 28, 2012 Share Posted October 28, 2012 Ram Guy did you ever find out what the Specs were for the Temps sensors?? If they are 10 ohm 25 C sensors like the standard ones?? Link to comment Share on other sites More sharing options...
sharpx Posted October 28, 2012 Share Posted October 28, 2012 i've been trying to find out the same information, been emailing back and forth with tech support but it's like some sort of big secret or something, i have still to receive a clear response. I am also hoping to be either 10k or 50k so i can get the thread-in Koolance probes. I also hope that they come around and publish a proper User's Manual for Link products, that installation guide is a poor attempt to provide any type of documentation. Link to comment Share on other sites More sharing options...
sharpx Posted October 31, 2012 Share Posted October 31, 2012 I received an answer from Corsair tech support so i thought i'd share the info. they said the temp sensors are 10 Ohm but i think they meant 10 kOhm, i replied asking for a confirmation. If that's the case there are 3rd party sensors that can be used on the cooling loop directly. I'll update once i hear back with the confirmation. EDIT: 10kOhm confirmed (thanks RamGuy for chasing this and getting an answer) Link to comment Share on other sites More sharing options...
wytnyt Posted October 31, 2012 Share Posted October 31, 2012 i dont see the significant advantage unless only one sensor is needed.of course having several nodes then it may be practical Link to comment Share on other sites More sharing options...
sharpx Posted October 31, 2012 Share Posted October 31, 2012 @wytnyt your reply went over my head, what do you mean by you don't see the advantage? of what over what? the question that was asked was what is the temp sensor value to know if thread-in sensors can be used in the cooling loop, basically compatibility wise - i already have 3 sensors in my custom cooling setup and prefer to keep those rather than using the stick on ones which are less accurate when it comes to the coolant temperature. But that's just in my case, you also said you'd like to know but now i'm not sure why :confused: Link to comment Share on other sites More sharing options...
wytnyt Posted October 31, 2012 Share Posted October 31, 2012 no,your initial post went over MY head :o: i havent re read the post since started and thought you were referring using the stick on sensors instead of thread in,sorry bout that but its all ram-guys fault,he shoulda answered sooner,some of us are old and we forget easy:D:;): Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 31, 2012 Corsair Employees Share Posted October 31, 2012 LOL I did answer this and I dont have an answer for you sorry but Cool Guy will have to answer this. Link to comment Share on other sites More sharing options...
GTXJackBauer Posted October 31, 2012 Share Posted October 31, 2012 I received an answer from Corsair tech support so i thought i'd share the info. they said the temp sensors are 10 Ohm but i think they meant 10 kOhm, i replied asking for a confirmation. If that's the case there are 3rd party sensors that can be used on the cooling loop directly. I'll update once i hear back with the confirmation. EDIT: 10kOhm confirmed (thanks RamGuy for chasing this and getting an answer) I have made a thread a while back http://forum.corsair.com/v3/showthread.php?t=105414 showing that I'am actually using 3rd party Phobya Temp Sensor which work well w/ the link since launch. Link to comment Share on other sites More sharing options...
Corsair Employees COOL GUY Posted November 1, 2012 Corsair Employees Share Posted November 1, 2012 For clarification it is 10k ohm. - NTC Thermistor - R25 = 10kOhm, B25/85 = 3380K Link to comment Share on other sites More sharing options...
sharpx Posted November 1, 2012 Share Posted November 1, 2012 For clarification it is 10k ohm. - NTC Thermistor - R25 = 10kOhm, B25/85 = 3380K excellent, thanks for that - exactly what i was looking for I have made a thread a while back http://forum.corsair.com/v3/showthread.php?t=105414 showing that I'am actually using 3rd party Phobya Temp Sensor which work well w/ the link since launch. i guess i didn't search hard enough but i did try to find it, probably used the wrong keywords. That's good info, thanks for the link no,your initial post went over MY head i havent re read the post since started and thought you were referring using the stick on sensors instead of thread in,sorry bout that but its all ram-guys fault,he shoulda answered sooner,some of us are old and we forget easy LOL, i thought i'm having a blonde moment, thanks for clarifying Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.