Jump to content
Corsair Community

Corsair Force GT not found on boot on my Acer Aspire


okianl

Recommended Posts

I have a Corsair Force GT 120GB and I installed it on my Acer Aspire 3820T-6840(i3-380M processor). The drive works great when it works, but lots of times the laptop can not see the drive when it boots. I have to restart it various times until it can see it and then it boots just fine.

 

The laptop had a Hitachi regular drive and it never did/does this kind of problem. The BIOS is set to AHCI mode, and I checked the firmware version for both the laptop Bios and the Corsair SSD and they have the latest version.

 

Does anybody has the same problem or knows if there is a fix for it?

 

Thank you,

Lucian

Link to comment
Share on other sites

Ram Guy,

 

I tried it on a different machine, my old E2180(pentium dual core @ 2.00GHZ) system and it didn't seem to have that problem.

 

I ran the Crystal Disk Info and I attached the screenshot to this post. It didn't do the issue before I took the screenshot, but it did it afterwards (after 10 or so restarts).

 

Thanks,

 

Lucian

ssd.thumb.png.48a446835f4913dca434515fc4b13b23.png

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...