Jump to content
Corsair Community

MSI K8N Neo Platinum with current RAM


evilrad

Recommended Posts

I have 2 sticks of Corsair CMX512-3200C2 in my current system. I plan on getting an AMD 64 3400+ and a MSI K8N Neo Platinum. I'd like to know if my 2 sticks of CMX512-3200C2 will work with the new motherboard. If so, what are the recommend timings that I should set the RAM to run at? Thanks
Link to comment
Share on other sites

[url]http://www.anandtech.com/printarticle.html?i=2036[/url] [url]http://www.hexus.net/content/reviews/review_print.php?dXJsX3Jldmlld19JRD03NzY=[/url] They state: DRAM Voltage Auto, 2.5V to 2.85V in 0.05V increments gbreezer80, where are you getting your info from? Hexus even has a screenshot of it at 2.75v.
Link to comment
Share on other sites

  • Corsair Employee
XMS3200C2 would be rated at Cass 2.5 on AMD platform! Please follow the link in my signature [URL=http://www.houseofhelp.com/forums/showthread.php?s=&threadid=8048]"What are the correct timings for My Module?"[/URL] and look up the part# in question!
Link to comment
Share on other sites

  • 2 weeks later...
Well, it looks like there was one problem with the RAM. I have two different versions of it. Version 1.2 and 2.2, and the motherboard does not like the 1.2 version. Even with both sticks, it only reads the RAM as being 256MB running at 333Mhz. I'm just going to buy all new RAM. I should have done that in the first place.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...