Jump to content
Corsair Community

Abit nf7-s2, XMS dual problems


bkskaggs

Recommended Posts

Was running "other" ram, installed new corsair ram (dual channel 256mbX2). Part # CMX256A-2700C2. It will not boot up windows corectly. I ran memtest on both sticks and each stick at once in the dual slot, no errors. It will also not boot up correctly with the "old" ram now. These problems only happen in dual mode, it works perfect in single channel. I have tried to increase the volts to 2.7 and up. my timings are 7,3,3,2.5. I have also changed these setting around and tried to boot...no luck. My specs are as follows: AMD ath 2.8 Abit nf7-s2 2X XMS 256 2700 ram timing 100% 7,3,3,2.5 volts=2.7
Link to comment
Share on other sites

  • Corsair Employees
If the modules will pass [url]www.memtest.org[/url] one up or with both in single channel but not post or run properly in dual channel that would suggest a problem with the chipset or CPU! I would test the memory on another system if you can to be sure!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...