Jump to content
Corsair Community

Shuttle AN35N-Ultra and TwinX XMS 3200LL 1.1


magicfame

Recommended Posts

hey i have a problem where whenever i try to overclock or even underclock (problem persists if i change any parameter e.g. Vdimm), my computer wont boot at all. soo i reset CMOS and set frequency back to optimal settings and it still wont boot. i set vdimm to 2.7 and still no go. the only way for it to boot is if i use my hyperx ram, set fsb to 133, shut down and put in the twinx corsairs xms. other than that it wont boot. ive already ran memtest for 7 hours and there was zero errors on it. can anyone help me out? thanks With my hyperx i can go up to 200x11 fsb but with xms i cant even boot up wit optimal settings. ive tried only using one stick instead of two, also diff slots ive tried booting with loose timings, 2.5-3-3-11 i set my ratio at 100% 1:1, 6:5, 5:6 nothing seems to work =/// ive read that article about nforce based mobos [URL=http://www.houseofhelp.com/forums/showthread.php?t=10642]http://www.houseofhelp.com/forums/showthread.php?t=10642[/URL] soo i need a bios flash? im using AN35N-Ultra 1.1 mobo wit 1700+ t-bred B
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...