Jump to content
Corsair Community

CML8GX3M2A1600C9 and Asrock Z77 Extreme 4


Devst8nDscoDave

Recommended Posts

Having issues getting this memory to work in dual channel mode. Works in single channel no probs. Ran memtest86, no errors. Ran Intel CPU diagnostics, no errors.

In dual channel mode it refuses to post and the rare time it does post it just freezes. I have tried manually setting memory config, using XMP, lowering speed, increasing voltage etc. Got any suggestions? Thanks.

Link to comment
Share on other sites

  • Corsair Employees
I agree with peanutz94 that is the right course of action check the MB BIOS first thing, in most cases its as simple as updating to the latest BIOS. However, if you have Windows installed, I would run CPU-Z and take a screen shot of the SPD tab for each module and compare them to be sure the modules have the exact same SPD is programmed exactly the same. It is rare that we would make a mistake but it can happen that one of the modules is miss programmed.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...