Jump to content
Corsair Community

XMS-3200XLPro Timings


Recommended Posts

I have a Gigabyte K8ns Pro and have recently installed TwinX 1024 XMS 3200XLPro DIMMS and have a question about Timings. My MB didn't read the SPD properly and I have a few other settings I would like to know about as there are quite a few. So my question is what is the optimal settings for the following timings: Row Cycle Time (tRC) Row Refresh Cyc Time (tRFC) Ras# to Cas# Delay (tRCD) Row to Row Delay (tRRD) Min Ras# Active time (tRAS) Row Precharge Time (tRP) Write Recovery Time (tWR) Write to Read Delay (tWTR) Read to Write Delay (tRWT) Refresh Period (tREF) Enable 2T Timing (Should this be enabeld or not?) Thanks :)
Link to comment
Share on other sites

DRAM Clock: 200 MHz SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 2T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 5T SDRAM Bank Interleave: 4 Bank All other settings are motherboard defaults.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...