Jump to content
Corsair Community

Corsair Airflow Pro Dynamic Memory Display


jacksonn24

Recommended Posts

  • 2 weeks later...

I've had my Airflow Pro for at least a year and a half. I have tried searching for a chart as to what temperature ranges are assigned to each color, but have given up. I even called Tech Support and they didn't have the data. Oh well.

 

I'll quietly wait for the digital cable that connects it to the Link Commander, and then I'll be satisfied.

Link to comment
Share on other sites

  • 2 weeks later...

Not sure if better to add to this post, or start another post, but I'd like to know why all the memory "usage" lights flash when I only have 4 modules connected.

I have connected to "A", "B", "E" and "F". Only those 4 temperature lights are lit, but all 6 memory "usage" lights flash showing use.

Is that how the unit is supposed to work?

 

Mforkash: it is possible that the modules will not give a numerical temperature. That is probably why Tech Support could not tell you what the actual temperature range of the lights are: the modules were not "programmed" to give numerical value for temperature. Most likely if you went a numerical value, then you will need to use an external sensor.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...