Jump to content
Corsair Community

SSD preforming Less


Recommended Posts

You sure you're not mixing something up? Because your motherboard only provides SATA3 via an onboard marvell controller, which is limited to a maximum of ~400MB/s reads and around 250 write.


Also, the specs of the Force series are derived from utilizing an native Intel SATA3 controller.


You can try secure erasing the disk to regain factory performance - whatever that might be in your case, since you're not using a native Intel SATA3 port. There should be a guide in the stickies.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...