red454 Posted March 11, 2012 Share Posted March 11, 2012 I noticed that the buttons on the front panel were starting to feel funny, sort or rough when you would push them. Mostly the button to turn on the LED fan lights. So I took the front panel off (it pops off easily - make sure noting is plugged into the USB or headphone ports) and noticed that they were heat staked and it appears that whoever staked them, didn't do it right or the heated tool was not hot enough to thoroughly melt the plastic and secure the buttons in place. I put a drop of super glue at each stake point (two per button) and that did the trick. See attached pic - I put a green X next to each point. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.