Jump to content
Corsair Community

Abit KV8 w/ 3200c2pt XMS corsair twinx.


Helmut

Recommended Posts

I have an abit kv8 with a 2800+ "newcastle". As far as I can tell via tests the cpu is stable. However, running memtest and prime95 I get severe stability problems when running both sticks of ram, and none when running a single stick. I have tested both sticks of ram seperately and no problems have arisen. I use an Antec 430w TruePower psu. I have tried raising and lowering voltages...ram, hypertransport, agp, etc. Nothing has given me a stable system with both sticks together. Any thoughts/ideas?
Link to comment
Share on other sites

  • Corsair Employee
Please try the memory in slots 1-3 and set the Dim Voltage to 2.7 Volts and set the timings manually to Cass 2.5-3-3-6 and then test with [url]www.memtest86.com[/url] to make sure it's stable! If you get errors, please test the modules one at a time and let's make sure one is not failing!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...