Jump to content
Corsair Community

Corsair Vengeance LP 1600 C8 - blue screen/fails memory test with XMP enabled


Recommended Posts



U can't enable XMP profile and overclock cpu at the same time

wend enable XMP memory run at 1600MHz 8-8-8-24

But if u overclock cpu Memory will oveclock at the same time and it will go over 1600MHz.

Run Vengeance LP 1600 C8 at more then 1600MHz with a latancy ove 8-8-8-24 is a lot ove overclock and won't be stable.


U ave to manuely set memory if y want to OC cpu

My advise, set XMP profile then set it to manuel and just change memory speed to 1066 MHz or 1333MHz with same latacy ove XMP. Then u could OC cpu up to wend memory will run around 1600MHz. This way your system sould be stable


hope this help

sincerly yours

Link to comment
Share on other sites

ok then u ave to test all stick ove memory

But before check bios if it up to date as it Improve system stability and memory compatibility


To test memory intall only one memory modual and test if u got bluescreens

If only one modual give u bluescreens then it defect.

U could run memtest to see if memory modual give u error.


Hope this help

sincerly yours

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...