Jump to content
Corsair Community

TWINX1024-3200C2PRO overclocking?


Recommended Posts

Hey. I am going to buy some Corsair TWINX1024-3200C2PRO for my system: Barton 2500+ Abit NF7-S But is it possible to run them at 220-230 MHz? It is a lot of money if they can’t run at so high speeds :) Hope somebody can help me /Inside Denmark
Link to comment
Share on other sites

  • 2 weeks later...
Most likely the PC3200 Pro will not run at 230mhz. You'd be much better off with the PC3200XL. However, if you use that RAM, you will likely need to set the timings manually as the SPD timings MIGHT be too aggressive for the MOBO. Or, it may run just fine. Mike.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...