Leetec Posted February 17, 2012 Share Posted February 17, 2012 I just bought a pair of this CMX8GX3M2A1333C9 (v8) to use on ASUS P8Z68-M Pro, but can't get into POST screen. I figure out it only work on Channel B on that board, but not dual channel mode or any slot on channel A. Tried in BIOS set ram speed 1333 voltage 1.6v but no luck. The red waring light for Ram on ASUS board stay on, using the MemOK! button has no different. prefer to run at dual channel mode, any help? my configure: i5-2500 CMX8GX3M2A1333C9 v8 ASUS P8Z68-M Pro Huntkey Jumper 450B Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 25, 2012 Corsair Employees Share Posted February 25, 2012 With the system post with either module in slot B when only one is installed? Or can you test the memory in another MB? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.