Kibarob Posted February 7, 2012 Share Posted February 7, 2012 Is it possable to take the H60 model and not only hook it up to your cpu, but also to your Videocard in series or parallel? Just curious as my VC is overheating for odd reason and I found a LQ shield for my GFX card. so was wondering if i could hook this cooler to not only CPU but take the other hose/hoses and connect the VC and then to the radiator? Link to comment Share on other sites More sharing options...
Yellowbeard Posted February 7, 2012 Share Posted February 7, 2012 Technically it is possible but the radiator is a bit on the small side for cooling really hot power hungry GPUs and a CPU. Also, it will void your warranty. Link to comment Share on other sites More sharing options...
Kibarob Posted February 7, 2012 Author Share Posted February 7, 2012 Okay, thanks for the reply. The whay the heat sink on my GPU is set up makes it overheat for some reason, so i was looking into it as an option. Does Corsair's higher end LQ units either: Have the ability to cool both? Would it be possable to get a bigger Radiator (possabily from the higher end units, but still use the same H60 CPU sink *is guessing that all tube connections are the same* to compinsate? Just looking for options. Link to comment Share on other sites More sharing options...
wlw_wl Posted February 7, 2012 Share Posted February 7, 2012 H100 has 240 RAD, while this might be sufficient to cool down your GPU, it rather won't suffice for both GPU and CPU at the same time. And, at the price of H100, you can pretty much get a custom water cooling so what you're trying to do is rather pointless. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.