dahlia Posted February 2, 2012 Share Posted February 2, 2012 Hello, this is my first build and I am having trouble figuring out how to get the front LED fans on my 400R case to work? I found the Molex connector with the two fans attached to the adapter in the back (pic 1)...I connected the molex to my PSU (pic 2), but the PSU cord with the Molex connectors has this little 4-pin connector (pic 3). Do I have to put that into my motherboard or will my fans run with just the molex connection? Here is an image of the connector in question. I ask if it is necessary to put into my mobo, because as far as I know, from scouring both my motherboard and manual multiple times, I am not seeing any way to connect this little guy anywhere... http://i42.tinypic.com/2ngrig3.jpg Link to comment Share on other sites More sharing options...
Toasted Posted February 2, 2012 Share Posted February 2, 2012 That looks like a Floppy disk drive power connector. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 7, 2012 Corsair Employee Share Posted February 7, 2012 Floppy connector Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.