Boombox Posted February 1, 2012 Share Posted February 1, 2012 Alright guys, I had to reinstall Windows but before i did this i saved my profiles to my k90. Now, how do i get them back onto the pc from the keyboard? Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 2, 2012 Corsair Employees Share Posted February 2, 2012 Confirm that once you reinstall the software you see your hardware profiles that are saved on the K90 in the manage Profiles TAB? All you need to do is have hardware playback un clicked and it will run as software. Link to comment Share on other sites More sharing options...
Boombox Posted February 3, 2012 Author Share Posted February 3, 2012 I reinstalled Windows and the the corsair software but my saved profile does not show up in the software interface. I'm 99% sure i saved it to keyboard. More than once as i updated my macros a few times. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 3, 2012 Corsair Employees Share Posted February 3, 2012 The macros will be saved to the keyboard. Once you install the software you will be not be able to add or edit any macro's that are saved to the keyboard. It will no longer show up under the software profiles. What I would suggest doing is saving the profile to a flash drive, then after your reinstall load them again into the software. Link to comment Share on other sites More sharing options...
Boombox Posted February 4, 2012 Author Share Posted February 4, 2012 It will be really good if you add a feature to the software to be able to copy/download from keyboard/mouse. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 6, 2012 Corsair Employees Share Posted February 6, 2012 I agree. It has been requested to our software team. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.