TwiZteD Posted January 29, 2012 Share Posted January 29, 2012 Hi Guys, Just put my new computer together: Running win7 ultimate i7 2600k , Z68A-GD65 Gen3 , 16g DDR3 1600mhz, GTX 570 ,CSSDFS3 120 gb, WD Green 2tb, 750w, Havik 140, P183 And i put the msahci on win7 and bios on But i still get bad results: http://s8.postimage.org/nivns1b6t/fel.png I used the guide with the temp files and all that also, but did not help. Any more tips ? I updated the Marvell drivers also, and i have the newest drivers on all my parts. Thanks // TwiZteD Link to comment Share on other sites More sharing options...
Yellowbeard Posted January 29, 2012 Share Posted January 29, 2012 Test it with ATTO. Link to comment Share on other sites More sharing options...
TwiZteD Posted January 29, 2012 Author Share Posted January 29, 2012 How does this look ? http://s14.postimage.org/5blvymaqp/fel2.png http://s18.postimage.org/gvde4swll/fel3.png Link to comment Share on other sites More sharing options...
Yellowbeard Posted January 29, 2012 Share Posted January 29, 2012 ATTO looks perfect and it's obviously attached to the Intel SATA 3/6Gb controller based on the result. If you are not using the Marvell controller, you may as well disable it in the BIOS. Leaving it enabled makes the POST process take longer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.