Kimber Posted January 15, 2012 Share Posted January 15, 2012 Was adjusting my DPI via the software earlier, and the laser stopped tracking Normally it does then when I change it for a few moments, though this time it seemed to have completely stopped working. The side buttons seem to still function as well as the left click I've heard that there are plenty of software glitches that can do this, though I've tried most fixes and neither seem to work Also tried uninstalling the software, re-installing, trying several USB ports Any solutions? Thanks! Edit: Seems to not function at all when I plug it into certain USB ports, and I've tried at 5 so far (each with different devices that worked on each port) Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 16, 2012 Corsair Employees Share Posted January 16, 2012 Go ahead with the software installed change the lift height, and change back to medium. Link to comment Share on other sites More sharing options...
samsamm777 Posted January 17, 2012 Share Posted January 17, 2012 seems my m60 has done the same. cant get the laser back on at all! ive tried changing the lift height. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 18, 2012 Corsair Employees Share Posted January 18, 2012 If the laser still does not work please use the link on the left hand side of the page for an RMA. Link to comment Share on other sites More sharing options...
samsamm777 Posted January 18, 2012 Share Posted January 18, 2012 I've submitted an RMA. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 18, 2012 Corsair Employees Share Posted January 18, 2012 Sorry again for the issue you are experiencing. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.