Jump to content
Corsair Community

Force series 3, 120 GB, firmware 1.33 need 2-3 resets to boot normally


eriklysoe

Recommended Posts

Hi

 

Have a Asus P5Q Deluxe mortherboard, bios updated, achi activated, ssd firm updated to 1.33. Still the boot is not functioning properly. Almost every time I turn on the machine, the boot disk is not found. Have to reset, sometimes 2-3 times to get the machine to start up. Had before Corsair SSD Force (not 3) 120gb, but it just stopped working after 3/4 year. Before crash, it worked very well, had no problems at all with this. The disk here (force 3) with boot problems I got after an RMA.

 

Does anybody experience similar problems? What can I do?

 

Best

Erik

Link to comment
Share on other sites

I found out the problem, the ssd was NOT detected first in boot. But, still it booted from ssd after some resets. I tried to move it first, but then it did not boot at all. The solution was to reinstall win7, and after that the disc showed up first. Don't know what happen during the last win7 install.

 

Problem solved:laughing:

 

Erik

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...