rpuleo Posted January 14, 2012 Share Posted January 14, 2012 Force gt SSD is stuck at 99% in secure erase with adaptec 6805. Tried to do a format and use windows adaptec software manager with no luck. Tried different ports too. Any help? Link to comment Share on other sites More sharing options...
Toasted Posted January 14, 2012 Share Posted January 14, 2012 Post your System Specs. Link to comment Share on other sites More sharing options...
rpuleo Posted February 2, 2012 Author Share Posted February 2, 2012 Secure erase was attempted in the raid card bios. Why do computers specs matter? Link to comment Share on other sites More sharing options...
Toasted Posted February 2, 2012 Share Posted February 2, 2012 -Have you tried using the onboard (motherboard) SATA ports to secure erase the SSD instead of the RAID card? Link to comment Share on other sites More sharing options...
Yellowbeard Posted February 2, 2012 Share Posted February 2, 2012 Secure erase was attempted in the raid card bios. Why do computers specs matter? They matter because it's virtually impossible to assist you without them. Link to comment Share on other sites More sharing options...
m.oreilly Posted February 8, 2012 Share Posted February 8, 2012 toasted is on it. you need to secure erase using the onboard sata ports, the adaptec sata tunneling protocol/drivers will not allow pass-through, as far as i know. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.