Unknown85 Posted January 13, 2012 Share Posted January 13, 2012 Hello, I have the regular WASD(black) keys installed. Is it normal that the "W" key itself sits higher then all the other keys? Link to comment Share on other sites More sharing options...
stratosrally Posted January 13, 2012 Share Posted January 13, 2012 Mine certainly doesn't... Have you tried removing it with the key-puller and checking underneath to see if there is perhaps some obstruction? Remove the "E" key as well and compare the two - if they are the same underneath try pressing them back on with smooth and steady firmness until they are fully seated and check again. If that doesn't fix it, I'd swap the W for the E, install them and see which key sits high - determining whether it is the keycap that is at fault or the keyswitch below it. Link to comment Share on other sites More sharing options...
Unknown85 Posted January 13, 2012 Author Share Posted January 13, 2012 I'm an idiot. When I was swapping out the red keys with the black. The "W" key wasn't seated all the way. I just pushed really hard like you mention and now it's flush with the other keys. Thank's for your help. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 13, 2012 Corsair Employees Share Posted January 13, 2012 Great. I'm glad you were able to get them all at the same height. No worries you may of helped someone else with the same issue :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.