XxKR1spyxX Posted January 13, 2012 Share Posted January 13, 2012 i just finished building my first pc and the H80 directions only show details on how to install the cooling block. I watched this vid Are the proper places to install the pump wires is the single wire goes to cpu fan header and the other 2 plug into the molex to the psu ?I have an Asus p8z68 v pro/gen3 board is there another fan header port on the mobo that will run the pump at 100% default or do i have to go in the bios to change the speed of the cpu fan to 100%? I have not booted it up yet but i just want to make sure Link to comment Share on other sites More sharing options...
Synthohol Posted January 13, 2012 Share Posted January 13, 2012 best just to set the bios to 100% Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 17, 2012 Corsair Employees Share Posted January 17, 2012 Are the proper places to install the pump wires is the single wire goes to cpu fan header and the other 2 plug into the molex to the psu ? Yes and Yes. Link to comment Share on other sites More sharing options...
bryanseva Posted January 29, 2012 Share Posted January 29, 2012 Thanks this is what I needed to know. Very disappointed at the incompleteness of the instructions. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.