simplefella2003 Posted January 11, 2012 Share Posted January 11, 2012 Hi, I have a Force3 128gb in Aspire 5742 Laptop (sata II, whereas disk is sata III). On boot, sometimes, windows wants to check consistency of the disk. If I let it, lots of lines of this follows: Deleting corrupt attribute record (128, '') from file record segment xxxxxx. Usually a number in the 62xxx - 65xxx range. In the past I was getting BSOD from having this ssd and WD 500gb at the same time but unistalling various Intel HD software stopped this and I havent installed the Intel Command Center thingy. The drive doesnt seem to be operating any faster than the WD drive, should this corrupt attributes be of concern, is there anything I should be doing or not doing? Thanks Link to comment Share on other sites More sharing options...
Toasted Posted January 12, 2012 Share Posted January 12, 2012 -Back up all your data, Secure erase the SSD and reinstall Windows. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.