Jump to content
Corsair Community

Correct memory settings?


STORMLORD

Recommended Posts

Asus A7N8X-X (single channel) Athlon XP 3000+ 333 FSB Corsair XMS3200C2PT TwinX (2 x 512 MB) Asus V9950GE GeForce FX 5900 128MB Akasa 460W PaxPower PSU I am in the process of building above system, and would appreciate any advice on correct memory settings (I am quite new to memory timings etc so please be gentle!) I do not plan to overclock, and will set CPU to default 333 (166) FSB 13 x multiplier. Above all I am looking for stability. Will the memory run OK on the default (auto) BIOS settings? Any help with memory / BIOS settings will be appreciated.
Link to comment
Share on other sites

  • Corsair Employees
I would agree with mike, but you can start with these settings for reference: CPU Freq: 166 Dim Voltage: 2.7 Volts Memory Frequency 100% or 1-1 DRAM Timing (overrides SPD values): Manual System Performance: Normal or User Defined SDRAM Bank cycle time (or tRAS): 6 SDRAM Bank Interleave: 4 SDRAM Row Precharge (tRP): 3 SDRAM RAS-to-CAS Delay (tRCD): 3 SDRAM CAS Latency: 2.5
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...