andyvee Posted December 17, 2011 Share Posted December 17, 2011 My H1000 ( will be 2 next easter ) had a GTX590 cabled to 12V2 and has started black screening along with fans running 100% and the nvidia logo going out on the card . After a lot of testing i narrowed it to the PSU and currently have the card powered from the top 2 blue connectors , ie 1from 12V1 and 1 from 12V2 . I know this is not a recommended config but wanted to check if a GTX 590 is too much for this PSU or whether the 12V2 line should handle it fine and the PSU is just faulty . Also on the 12V2 line i have 4 7200 HDD and 9 120/140mm fans plus an H50 . If it does need to be replaced how would i go about getting an advance RMA and if i need to upgrade what would be the best option . Thanks for looking in . Link to comment Share on other sites More sharing options...
andyvee Posted December 17, 2011 Author Share Posted December 17, 2011 double post , please delete one Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 19, 2011 Corsair Employees Share Posted December 19, 2011 I would connect the Video card to 12V1 and see if it does the same thing, If it is still displaying these same symptoms we can try and replace it under WARRANTY. Please use the link on the left and request an RMA. Link to comment Share on other sites More sharing options...
andyvee Posted December 20, 2011 Author Share Posted December 20, 2011 Hi Ramguy , please see the other post with the same title as this one was meant to be deleted ( double posted somehow ) . As regards connecting to 12v1 , it causes random errors but i would expect that as the combination of the 590 and my motherboard on the same rail is well over 500 watt at full load . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.