aya90 Posted December 16, 2011 Share Posted December 16, 2011 Hi guys i just bought my case and i carefully plugged the power led + and - but no light , tried manual plug in still the same I am using P8Z68 V PRO MOTHER BOARD HELP MEEEEEEEEEEEEEEEE Link to comment Share on other sites More sharing options...
Wired Posted December 16, 2011 Share Posted December 16, 2011 It's not an emergency if the button works and the LED doesn't work... :) Link to comment Share on other sites More sharing options...
aya90 Posted December 16, 2011 Author Share Posted December 16, 2011 the button works with off and on BUT NO LED is lighting up .. the white version should light up!! OH NOOOOOOOOOO HELP MEEEEE Link to comment Share on other sites More sharing options...
Wired Posted December 16, 2011 Share Posted December 16, 2011 Very true, but again, not an emergency. No need to panic. Fixed all caps in thread title and removed *EMERGENCY* Link to comment Share on other sites More sharing options...
aya90 Posted December 16, 2011 Author Share Posted December 16, 2011 ?????? .......... So how do i fix it. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 17, 2011 Corsair Employees Share Posted December 17, 2011 Did you make sure that they are connected to the PWR LED header of the motherboard? try to switch each connector and see if that helps. Link to comment Share on other sites More sharing options...
partogi Posted March 29, 2013 Share Posted March 29, 2013 Did you make sure that they are connected to the PWR LED header of the motherboard? try to switch each connector and see if that helps. My power button LED isn't working too, and I've tried to switch the connector (Power LED + to - in header, vice versa) Link to comment Share on other sites More sharing options...
jac91584 Posted March 29, 2013 Share Posted March 29, 2013 lol come to think of it, mine isn't working either, i never really noticed that until i read this, and i have the exact same motherboard. it used to work just fine. but then again i do have an issue on my front panel (audio connector broken) filled an RMA and thread out and awaiting reply Link to comment Share on other sites More sharing options...
Toasted Posted March 30, 2013 Share Posted March 30, 2013 If your power L.E.D. isn't working. Request an RMA to replace the front panel I/O. Link to comment Share on other sites More sharing options...
vistvan83 Posted November 21, 2013 Share Posted November 21, 2013 Hm...seems that i have the same issue. The IO panel was already repalced, because the FAN controller got broken. I'm usind a 3rd Party controller since then. Now my power LED died..First id did licker, then it has no ligt at all. It seems taht this panel is very fragile... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.