errut Posted December 11, 2011 Share Posted December 11, 2011 in 600t. connecting it to the cha-fan controller, how does it work? manual control and automatic control through the mb-algorithm? Link to comment Share on other sites More sharing options...
Toasted Posted December 11, 2011 Share Posted December 11, 2011 You connect it to a molex connector. Then use the knob to adjust the fan speed. Link to comment Share on other sites More sharing options...
errut Posted December 11, 2011 Author Share Posted December 11, 2011 ok. there is the power cable and there are 4 fan cables.furthermore additional cables coming from the case fans. but the connectors don`t fit, unless i`ve missed something Link to comment Share on other sites More sharing options...
BPags52 Posted December 11, 2011 Share Posted December 11, 2011 The 3-pin fan connecters on the controller all have a cap on them that needs to be removed to be able to plug fans into them. Did you remove the caps? Link to comment Share on other sites More sharing options...
errut Posted December 12, 2011 Author Share Posted December 12, 2011 i was lucky i found them. thank you. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 14, 2011 Corsair Employees Share Posted December 14, 2011 Here is a blog that explains the fan controller, http://www.corsair.com/blog/how-to-identify-your-graphite-series-600t-fan-controller-cables/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.