Ndrew_P Posted December 6, 2011 Share Posted December 6, 2011 Hi guy ;): sorry for my poor English this is my LAST CHANCE for a solution this is the problem: i building my new PC whit MoBO: MSI P67A GD65 or equivalent or ASROCK Z68 ExTREme 4 GEN3 CPU: intel i5 2500K PSU: 850w MODU corsair GPU: 2x GIGABYTE GTX 560 TI OC RAM: CORSAIR SSD: FORCE3 120Gb etc but last week i BOUGTH this ram: http://www.corsair.com/memory-by-product-family/dominator/cmp8gx3m4a1600c8.html when i touched this i mind: wow excelent and beautiful RAM... but on Italian Hardware forum i read: ram at 1.65V are not for i5 2° generation :eek: :eek: :eek: i5 2500 support only 1.5v and now? I checked on other European forums and all say: 1.65v is muck to 2500k :greencry: I can USE my splendid RAM in this configuration? What should I do? but in the tech support this ram is supported on i5 2500k http://www2.corsair.com/configurator/product_results.aspx?id=1872980 :confused: i'm so cofusedand the eshop does not collect used products please help me and sorry my English Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 6, 2011 Corsair Employees Share Posted December 6, 2011 You can use these modules just load setup defaults and enable XMP should be all you have to do. However, our vengeance modules would be the best choice for any Sandy Bridge chipset as they are made for and tested on this platform. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.