Nagruity Posted July 18, 2004 Share Posted July 18, 2004 I have two memory modules for a 1GB Dual Channel configuration. They will only work properly when set to 166Mhz (333). If I manually set them to 200Mhz (400) I cannot boot into Windows. Please help, thanks. Note* I have the latest BIOS installed. I cannot adjust the CAS Latency in the BIOS. When System Performance is set to Normal (400FSB, 333Memory) it works, Turbo won't even post and Manual (400FSB, 400Memory) won't boot into windows (blue screen followed with a quick restart). Link to comment Share on other sites More sharing options...
Wired Posted July 19, 2004 Share Posted July 19, 2004 Are they TwinX modules? Are there any timings you can change for the memory in the BIOS? Do they work at 400 Mhz when not in dual channel mode? Do they run at 400 Mhz with one stick at a time? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.