HeyYoWL Posted November 30, 2011 Share Posted November 30, 2011 Hey all, I bought a NZXT Sentry 2 touch screen fan controller a few weeks ago before I got my 600T. I didn't realize that the tooless optical drives would give me troubles but unfortunately there's no way secure the controller in the optical drive bay. The left side has room to screw in, but the right way has no way of going in. I really like this fan controller and don't wanna get rid of it.. is there anything that can be done? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 2, 2011 Corsair Employees Share Posted December 2, 2011 I am sorry but our case would only lock with a drive like a CD-ROM. You may be able make some type of custom mounting if you like but short of that I am not sure what you can try. Have you spoke to the manufacturer of the Controller to see if they have any suggestions? Link to comment Share on other sites More sharing options...
mondenath Posted December 12, 2011 Share Posted December 12, 2011 Hi you can do it. You can see from the right the hole for the left side. But you have to manage to screw in from the top of the controller. So that atleast one can be easily screwed. First i was also shocked but managed to key in one at both the sides. its tight fit. Link to comment Share on other sites More sharing options...
Phone Man Posted December 12, 2011 Share Posted December 12, 2011 I have that same controller and the 400R case. It was real easy to just pop off the mounting clips. You may be able to to remove the clips on yours also. Jim :cool: Link to comment Share on other sites More sharing options...
HeyYoWL Posted December 13, 2011 Author Share Posted December 13, 2011 I am sorry but our case would only lock with a drive like a CD-ROM. You may be able make some type of custom mounting if you like but short of that I am not sure what you can try. Have you spoke to the manufacturer of the Controller to see if they have any suggestions? Yup, no response. =\ You'd think as a company they'd give me an automated response but nope... Hi you can do it. You can see from the right the hole for the left side. But you have to manage to screw in from the top of the controller. So that atleast one can be easily screwed. First i was also shocked but managed to key in one at both the sides. its tight fit. What do you mean I have to screw in from the top exactly? So like a bird's eye view of the case? I have that same controller and the 400R case. It was real easy to just pop off the mounting clips. You may be able to to remove the clips on yours also. Jim :cool: Remove mounting clips from what, the drive bays in the 600T or the fan controller? How would I go about doing that? Thanks for any help guys! Link to comment Share on other sites More sharing options...
Phone Man Posted December 14, 2011 Share Posted December 14, 2011 The mounting latches on the side of the bay. They look the same as the one on the 400R and mine were mounted on two little tabs where they pivot. I just popped them off. Then you have access to all the screw holes on the bay. Jim Link to comment Share on other sites More sharing options...
HeyYoWL Posted December 15, 2011 Author Share Posted December 15, 2011 Will popping off the tabs break it? Can they be reattached in the future? Link to comment Share on other sites More sharing options...
Phone Man Posted December 15, 2011 Share Posted December 15, 2011 Mine came off OK on my 400R. Look closely where the latches pivot. The bay has a metal tab with a small hole and the latch has a plastic pin that sets in that hole. Just use a small screw driver or knife to gently pry the pin out of the hole and it comes right off. Be careful not to break the plastic pin. Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.