oldmanpushbmw Posted November 28, 2011 Share Posted November 28, 2011 this component can build in h100?mb=asus p8z68-v-pro-gen3 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 29, 2011 Corsair Employees Share Posted November 29, 2011 Yes, it will be compatible. Link to comment Share on other sites More sharing options...
oldmanpushbmw Posted November 30, 2011 Author Share Posted November 30, 2011 sorry,i mean is ram have block the h100?my ran is G.Skill - F3-12800CL7D-8GBXH bcos i haved saw some vedio on youtube that is very fit or some block h100 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 2, 2011 Corsair Employees Share Posted December 2, 2011 From the looks of it, the case does not have enough clearance on top so the fans goes over the DIMM slot area. Link to comment Share on other sites More sharing options...
parsec Posted December 2, 2011 Share Posted December 2, 2011 RAM GUY and oldmanpushbmw, I use a Phantom case, which includes brackets for mounting a radiator at the top of the case. The product page for this case includes a good picture of a 240mm radiator mounted in the case using the brackets I mentioned. That picture should answer most of your questions. I can't post the link to the picture, but it is easy to find and will really be helpful, I recommend that you find it. The radiator mounts nicely, but the fans are a big problem. It might be possible to use the radiator with the standard fans mounted on it, as is suggested by the manufacture, but only with very low profile DIMMs. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 3, 2011 Corsair Employees Share Posted December 3, 2011 Thanks parsec, it does look like that only Low profile DIMM is the only option, because of the fans. Link to comment Share on other sites More sharing options...
oldmanpushbmw Posted December 4, 2011 Author Share Posted December 4, 2011 thx,this i install done...dimm tall is 35mm,that is enought to install h100,the h100 fan is touch the dimm Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.