smoules Posted November 28, 2011 Share Posted November 28, 2011 Can anyone tell me why I can't get Window 7 Ultimate x64 to complete the installation when connected to the Marvell controller with EZ-backup/Raid 1 (mirroring) enabled. Installation completes and after the first boot I get an error after it states "setting up registry for the first time". This occurs whether or not I have RAID or AHCI mode set in the BIOS. I can install the OS successfully on both drives when not in RAID mode connected to the same port, just not in RAID mode. I have also tried loading the Marvell drivers during OS installation and still did not work. Can anyone offer any suggestions Thanks, Shannon Intel core i7 2600k Asus P8Z68 Deluxe/Gen 3 16GB Corsair Vengence 2 x Corsair Force 3 120GB (OS) 2 x Segate 1TB (Data/Backup) TT L10 Gaming Case Ant 800W P/S Link to comment Share on other sites More sharing options...
Toasted Posted November 28, 2011 Share Posted November 28, 2011 Marvell Controllers are buggy. Plug the SSDs in the Gray Intel SATA port. Link to comment Share on other sites More sharing options...
madnisman Posted November 28, 2011 Share Posted November 28, 2011 Right. Before you proceed, I would suggest that you SecureErase both drives (UN-RAIDED) with PartedMagic, then setup your RAID and install Win 7. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.