LuMiNOuS Posted November 11, 2011 Share Posted November 11, 2011 Hey I updated my SSD Firmware to 1.3.3 by connecting it to one of my board's SATA2 ports successfully and it has been working great for probably a week except today I've gotten a fex of these 0xF4 BSODs and system hangs... What can I do now? It is the same Force 3 120GB drive and the drive is also hidden after a BSOD/hang and I have to do a cold restart to boot it again Link to comment Share on other sites More sharing options...
Yellowbeard Posted November 11, 2011 Share Posted November 11, 2011 Hey I updated my SSD Firmware to 1.3.3 by connecting it to one of my board's SATA2 ports successfully and it has been working great for probably a week except today I've gotten a fex of these 0xF4 BSODs and system hangs... What can I do now? Did you try the other suggestions listed in the .PDF file? Link to comment Share on other sites More sharing options...
LuMiNOuS Posted November 11, 2011 Author Share Posted November 11, 2011 I just discovered that the firmware was not updated, something to do with the AHCI for the onboard SATA ship, but I fixed it and now I confirmed the firmware has been updated to 1.3.3 I will see in the next few days/weeks how it performs! :bigeyes: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.