mikeaus Posted July 15, 2004 Share Posted July 15, 2004 Does anyone know if this combination works successfully and if so what extra steps if any were needed? The Shuttle supports up to 2G dual-channel ECC/non-ECC unbuffered DDR333/400. They do not list compatibility support on their website. This memory is unregistered so it should work. The shuttle manual says that it doesn't support double-sided X16 DDR DIMMs. Scanning other posts it might be necessary to up the voltage but I don't know for sure. I am also looking at the very latest shuttle SB81P and the same question applies with the memory. Thanks in advance for any help. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 17, 2004 Corsair Employees Share Posted July 17, 2004 They should run fine with this system, but I would suggest that you get the latest bios and set the Dim Voltage to 2.75 Volts as well! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.