Jumpiefox Posted November 10, 2011 Share Posted November 10, 2011 Hi guys, Received a 8b kit today and replaced my old Kingston 4gb kit with it. But when i try to boot the system nothing happens. I can hear the fans rotating but thats about it there is no video signal no nothing. I tried the following alreadu: Both sticks in channel A1-B1 no go. A2-B2 no go. A1-A2 no go. B1-B2 no go. and i tried to boot the system with a single stick in also no go. Put the old sticks back and the system booted flawlessly. The old sticks are also 1600mhz 1.65v. Cpu: AMD phenom X4 945 mobo: Asus Asus m4a785td-v evo Any help would be appreciated kind off bummed out :( Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 10, 2011 Corsair Employees Share Posted November 10, 2011 The memory would have to be installed in slots A1 and B1 to be in D/C and I would try and reset the MB BIOS, with only one module installed and see if it will post. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.