Jump to content
Corsair Community

No BIOS post beep


joyeshk

Recommended Posts

Hello everyone.A few days ago i bought corsair vs2gb1333d3 memory module but its not working.My system is running fine if I use my other memory module(another company...1333mHz...DDR3...cl 9).So i went through my mobo's manual and found out that corsair vs2gb1333d3 is not on the compatible list.Now, what should I do??Please help.
Link to comment
Share on other sites

you can try...

remove the Battery and remove all of the memory and using the AC Adapter only turn on the system it should beep or blink for no memory detected then just un-plug the A/C adapter then install just one of our modules and see if it will post and let you into the BIOS setup to load setup defaults.

 

good luck.

also check the memory finder http://www.corsair.com/learn_n_explore/ for your laptop to see if indeed Corsair has qualified that ram.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...