Zibri Posted November 6, 2011 Share Posted November 6, 2011 I have 6 2gb modules. I bought 3 modules a few months ago and other 3 modules recently. Even though they're rated 8-8-8-24 CR2 @1600 mhz I'm actually running them at 8-8-7-20 CR1 @ 1600mhz. I wonder how low can I go. Anyone tested them? Another curiosity: the 2 3 dimm sets have different SPD... You can see all modules SPD here: http://dl.dropbox.com/u/1587166/Corsair%20Dominator%20CMP6GX3M3A1600C8.zip Modules 0, 2 and 4 were bought first. Modules 1 ,3 and 5 were bought last. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 9, 2011 Corsair Employees Share Posted November 9, 2011 You would get better performance with the TRAS set to a higher number and if the TRAS is set to aggressively you will start to get corrupt data on the HDD. TRAS should be set to CAS + TRCD + TRP which in your case would be 23, but I have found this being set a little higher will actually increase memory performance in memory benchmark, so op[timum setting would be 23-30 for TRAS. And TRP will have little effect on performance but if any setting is set to aggressive the system may become unstable or corrupt data. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.