jcmarques Posted November 2, 2011 Share Posted November 2, 2011 I recently got a AX750 PSU, and even before i got it, i decided to individual sleeving the cables, but before i do that, i want to know if by doing this, my PSU will lose the warranty? And sorry if my english is bad :sigh!: Link to comment Share on other sites More sharing options...
peanutz94 Posted November 2, 2011 Share Posted November 2, 2011 Sleeving the cables will not void the warranty. Have fun! Link to comment Share on other sites More sharing options...
jcmarques Posted November 2, 2011 Author Share Posted November 2, 2011 Sleeving the cables will not void the warranty. Have fun! Thank you! Now i can start my sleeving process. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 2, 2011 Corsair Employees Share Posted November 2, 2011 Sleeve on! Link to comment Share on other sites More sharing options...
jcmarques Posted November 7, 2011 Author Share Posted November 7, 2011 I have started to sleeve my psu cables, and i have a question, is there any pinout schematic for the 24 pin connector? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 11, 2011 Corsair Employees Share Posted November 11, 2011 all the cables are black. but it the same 24pin ATX pin configuration you can google. Link to comment Share on other sites More sharing options...
jcmarques Posted November 15, 2011 Author Share Posted November 15, 2011 http://img3.imageshack.us/img3/4854/pinout2.th.jpg This is my pinout, i found one in the forum, but it doesn't match to mine, and i only sleeving 4 o 5 cables, any help? Link to comment Share on other sites More sharing options...
peanutz94 Posted November 15, 2011 Share Posted November 15, 2011 What does not match? They follow a normal 24pin ATX configuration. Or are you talking about the end that connects to the psu? FWIW, i never used a pin out diagram. I purchased a set of wire marker stickers (found at most local home improvement stores)and just numbered my wires in the order i removed them from the connector. Drawing orientation diagrams along the way. So far it has not failed me yet.:) Or did just one wire at a time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.