lang0801 Posted October 20, 2011 Share Posted October 20, 2011 I installed my A50 and realized that the rubber things are actually touching the heat sink for my memory. Can I simply trim the little rubber piece to avoid this? What other options do I have? http://img836.imageshack.us/img836/5166/photo1bp.jpg Link to comment Share on other sites More sharing options...
Ginut Posted October 20, 2011 Share Posted October 20, 2011 Get a H series cooler, much better than the A series :) Link to comment Share on other sites More sharing options...
SpDFrek Posted October 20, 2011 Share Posted October 20, 2011 You can pull the rubber back through the outer hole in the fans and leave them dangling in the center section of the fan. Cutting the ends off of the mounts will only make it difficult to install again in the future. If you have no plans to remove the fan from the plastic mount you can cut them off. Tucking them back into the center section though keeps them from hitting the memory and keeps the functionality for the future. Link to comment Share on other sites More sharing options...
lang0801 Posted October 20, 2011 Author Share Posted October 20, 2011 Great, I will try that. Thanks a lot! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.