Jump to content
Corsair Community

650D front panel USB3 port


kwatch

Recommended Posts

the 650D has the pass-through style connector (that is it uses external USB plugs)

the intention is to route these out the back of the case and plug into the rear USB3.0 but you can connect them to the internal header on the motherboard using one of the various adapters out there, here's an example of one

Link to comment
Share on other sites

Corsair is planning on providing a MOBO adapter, but it isn't out yet and no ETA in sight. I found one that works perfectly for $14.99 from a well known overclocking online seller. There are three versions on three websites. One is just an adapter that, in my opinion, sticks out too far once the female connects are attached (I think it would overly load up the socket). Another one looks good, but has launched yet. Mine has a six-inch lead, so all you see is a black plug and dual cables routing through the 650D grommet where it connects with the front panel female leads in the cable management area.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...