Jump to content
Corsair Community

Corsair Vengeance 12gb 1600mhz memory kit won't post once it's set to 1600


S73nd4rr

Recommended Posts

Hello, I've recently built a PC with a Corsair XMS3 6gb triple channel memory kit, I have it running at 1600mhz with 1.64 volts on the dram bus (everything else is set to auto) and the system is running fine. but today I bought a Corsair vengeance 12gb triple channel memory kit, it Worked fine when I set it's frequency to 1066mhz and 1.5 volts on the dram bus, but whenever I set it to 1600mhz it will not post. I'm using an Asus rampage III formula motherboard (bios version 0505) and a Core i7 950 @ 3.07mhz stock (I'm aware setting the ram frequency will put it at 3.2ish mhz)
Link to comment
Share on other sites

Sorry for the delay, I found the IMC, it was the QPI/Dram voltage on this board, after setting it to 1.25v and the frequency to 1600mhz it still did not post. any ideas ?

 

On a side note, the 6gb XMS3 ram kit I'm using can be easily set to 1600mhz with 1.64v on the Dram bus and everything else set to auto, and it runs no problem

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...