Jump to content
Corsair Community

Force GT 120 Performance problem


Lexy

Recommended Posts

Please forgive me if there is some resemblance with other threads, but my problem seems to differ enough for me to boldly start a thread...

 

Results for my 120 Force GT seem to fall short quite a bit.

 

I tested with CrystalDiskMark, ATTA, and AS-SSD

For instance with Sequential it never exceeds 260-270 MB/s

 

I have Firmware 1.3.2

Motherboard Gigabyte Z68-UD3H-B3 (rev. 1.3)

Drive is attached to SATA III connector

BIOS=AHCI Mode

Win7

 

Am I overlooking something obvious here?

There is some data on the drive, but should that reflect in the performance like this?

Thank you for any help...

Crystal.png.fe3cba4d3fbf4a41e8b8515d68374129.png

Atto.png.01f210f6dff90186c4d6cf2c49380b7c.png

1687573333_ASSSD.png.36e67ea649abc0b450619d52efa789c2.png

Link to comment
Share on other sites

Problem solved, I guess

 

After running the Intel RST tool it showed that it was running on 3 GB.

Since I was so sure that I connected it to the right connector I opende my case.

Fiddled a bit with the SATA chord et voila (6G) !!!

I always thought that connecting SATA drives was Rocksolid.

I apologize...

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...