Jump to content
Corsair Community

600T: Anyone Having Trouble Fitting Cabling?


Megalith

Recommended Posts

I have my 600T loaded up with six drives, so I've got quite the number of cables flowing behind the motherboard tray. Problem is, there's so many that the panel doesn't close as flush to the rest of the case as it normally should, though it's still shut pretty securely thanks to the locking mechanisms.

 

Anyone run into the same problem, or should I do a better job of cabling next time?

Link to comment
Share on other sites

I have my 600T loaded up with six drives, so I've got quite the number of cables flowing behind the motherboard tray. Problem is, there's so many that the panel doesn't close as flush to the rest of the case as it normally should, though it's still shut pretty securely thanks to the locking mechanisms.

 

Anyone run into the same problem, or should I do a better job of cabling next time?

 

try to flatten your cables or coil them up and place a zip tie around the bunch and fasten it to the case.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...