Jump to content
Corsair Community

CMG4GX3M2B-1600C7 and Crosshair V


neo5555

Recommended Posts

Hey guys...

Just recently bought a Crosshair V and having lots of issues with BSOD's.

 

Prior to this, i had a Asus M4A89TD Pro-USB3 and all was good. I was running the above ram at 1600Mhz 7-7-7-20 1T no problems with my CPU OC'd to 4.1Ghz.

 

Now, on my new CH V board, i had been having lots of issues with BSOD's until i decided to run the ram at 2T as opposed to 1T.

 

Kinda dissapointing when you think that the new board is designed for overclocking and it can't handle 1T.

 

Anyway, is the above ram meant to run at 1T or 2T ? I have tried to find specs for this ram on Cosair's website to no avail..

 

Does anyone know the full settings for this ram ?

 

Thanx guys..

Link to comment
Share on other sites

  • Corsair Employees

Command Rate is more a memory controller setting and all of our memory modules are tested at 2T Command Rate unless other wise specified on the modules. This has been posted several time in relation to this question.

But if it worked on one MB but not the new check for the latest MB BIOS.

 

Command Rate is not really a memory setting and would be dependent on the make and model of MB and PSU and the specific CPU you have installed. You might look this/those setting /'s up on the BIOS Optimization Guide at Techarp and get a better explanation.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...